Summer Starts Here - Save up to 70%
Curt T-Connector Vehicle Wiring Harness Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevrolet Silverado 1500 we're going to be taking a look at it and showing you how to install the Curt T-Connector Vehicle Wiring Harness for Factory Tow Package with a 4-Pole Flat Trailer Connector. Now what's really nice about this wiring is it's going to literally plug right into our factory 7-way. That's going to not only allow us to have a 7-way plug, but also a 4-pole.Another thing I like is that the wiring is actually going to come pre-installed with some wire loom to not only help keep it protected, but to also give it a cleaner, more factory look. It's also going to have this dust cap, which is not only going to protect our terminals from any dirt or debris, but it's also going to allow us to store it around our safety chain loops just like this.To begin our install I went ahead and removed our spare tire. Now you don't have to, but it does give us a lot more room to work with. Now up here at our 7-way connector there's going to be a little gray clip. more
3/27/2019 2:52:15 PM
Trailer Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Speaker 1: Today on our 2013 Chevrolet Silverado, we're going to be installing Bargman's Fifth Wheel/Gooseneck 90-Degree Wiring Harness with the Seven-Pole Trailer Connector, part number 50-97-410.This truck bed mounted trailer connector is going to be ideal for hooking up your gooseneck or fifth wheel trailer. It's going to be located right in the back so once you've got your connection, you can just plug your trailer right in. You don't have to worry about the cable being too short, not draping over the back. It'll be nice and easy and protected.This is going to provide your trailer with all the necessary signals. This includes the tail lamps, brake lamps, left turn signal and right turn signal. Then, if your vehicle's wired up, you can also have reverse lamps back there as well as a charge line. more
9/25/2018 7:47:11 AM
Demco 5th Wheel/Gooseneck Wiring Harness Installation - 2012 Chevrolet Silverado- Video
Today on our 2012 Chevrolet Silverado 3500HD, we're going to be taking a look at and installing the Demco 5th Wheel Gooseneck 90-Degree Wiring Harness with seven pole plug, part number DM8555002. This is what this wiring kit is going to look like once it's installed on a vehicle. What's nice about this one, is that is has 10 feet of wire which makes it easier to choose your location and put it wherever you want. Whereas some of the other 5th wheel wiring kits, they don't come with that much wire. Got seven way connector here, and it's got the spring loaded lid in order to make sure that it stays covered when not in use. That's going to help keep water and moisture out there so that it doesn't corrode your connectors. This wiring kit is going to do a great job of providing seven way power here in the bed of the truck. That way when hauling a gooseneck or 5th wheel trailer, you're not going to have to drape the wiring coming off the trailer over the tailgate down to the factory seven way, but you can just plug it in here instead. Now, let's show you how to install it. more
10/14/2016 1:56:48 PM
Demco 5th Wheel/Gooseneck Wiring Harness Installation - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet-Silverado 3500HD, we're going to be taking a look at and installing the Demco 5th wheel gooseneck, 90 degree wiring harness with 7 pole plug with a 10 foot cord, part number DM8555002. First thing we'll need to do is we'll need to find a good location to mount our new 7-way connector. It's going to go in the inner wall of our bed here. Wherever you choose to do yours, you want to make sure that behind it there's no wiring or anything that's already there and also that you're going to have enough room that you can make sure that you can get your connector plugged on to the back of it behind this wall. We're going to put ours right up here, so it's nice high out of the way but still nice and easy to access. You want to drill a pilot hole, then I'll take a 2 inch hole saw and make a hole using that pilot hole that I just made. Let's now install the 7-way connector. more
9/26/2016 2:26:45 PM
Trailer Wiring Harness Installation - 2009 Chevrolet Silverado- Video
Today in our 2009 Chevrolet Silverado, we're going to be taking a look at installing the Curt T-connector vehicle wiring harness for factory total package four flat pole driller connection, part number C55384. Here it is installed. It's a nice forward flat if you're going to tow your trailer and you don't have to do any cutting on your wiring harness. It's going to plug in between your factor 7-way connector. Now, on this vehicle, we don't have one, but if you did, you'd have your 7-way up here and you'd have a forward flat down here. Now let's go ahead and show you how to install it. more
3/18/2016 12:36:22 PM
Trailer Wiring Harness Installation - 2011 Chevrolet Silverado- Video
Today on our 2011 Chevy Silverado we're going to review and install the Bargman custom fit vehicle wiring harness with a seven blade trailer connector, part number 54701-003. Now to begin our install, we need to find the mounting location for our new seven blade trailer connector. For our application we're going to mount ours here in the side rail of the pick up bed just behind the tail light. Next, we're going to make a pilot hole where we're going to mount our seven blade connector. Then we'll open up our pilot hole to two inches with our hole saw bit. Next, we'll go ahead and take the T-connector portion of our wiring harness, feeding it through our pre-drilled hole. Continue feeding the entire wire into the pickup bed side until our molded connector is up against the bed side how we're ready to secure it. more
8/17/2015 12:11:35 PM
Trailer Wiring Harness Installation - 2011 Chevrolet Silverado 50-97-410- Video
Today on our two thousand eleven Chevrolet Silverado, we're gonna review and install the Bardman fifth wheel gooseneck ninety degree wiring harness with seven pull trailer connector part number five zero dash nine seven dash four one zero. Now to begin our install, we need to find the mounting location for our new seven blade trailer connector. For our application, we're gonna mount ours here in the side rail of the pickup bed, just behind the tail light. Next, we're going to make a pilot hole where we're gonna mount our seven blade connector. Then we'll open up our pilot hole to two inches with our hole saw bit. Next, we'll go ahead and take the t-connector portion of our wiring harness, feeding it through our pre-drilled hole. Continue feeding the entire wire into the pickup bed side until our molded connector is up against the bedside and we're ready to secure it. To secure the connector, we'll use the self tapping screws provided with the install kit. Now just like that, our seven blade connector is mounted, and we'll move underneath to make our wiring connections. We're here underneath the pickup bed's side, below the tail light, behind the bumper. more
8/17/2015 12:11:06 PM
Trailer Connector Socket Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevrolet Silverado we're going to show you how to install the Hopkins Pollak 7 and 4-pole trailer connector socket with mounting bracket. This is the vehicle side. Part number is HM40975. Here's what the line looks like once you get it installed. Really nice, clean setup. We've got our 4-pole on this side. Our 7-pole is going to be on this side. more
6/19/2015 9:37:16 AM
Trailer Wiring Harness Installation - 2003 Chevrolet Silverado- Video
Today, on our 2003 Chevrolet Silverado, we'll be installing the Curt Custom Fit Vehicle Wiring Harness with 4-Pole Flat Trailer Connector, part number C55515. Well firstly, we locate the manufacturer's round seven-wire connector. Note, if your vehicle is equipped to the spare tire, you may need to lower the spare tire to gain access to the wiring. To this application, we don't have a spare tire in the way so we'll go ahead and locate the wiring. Here on the cross member of the frame rail, let me just pull it down as it's clipped to the wiring harness. We now have access to it. We'll then go ahead, press on the locking tab or we can remove the cap. Once we removed the cap, we're ready to install the new 4-pole trailer connector. more
3/14/2015 6:32:31 AM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2004 Chevrolet Silverado- Video
Today on our 2004 Chevrolet Silverado 3500, we'll be installing the Hopkins Endurance 5th Wheel/Gooseneck 90-Degree Wiring Harness, Part Number 41157. Now, to begin our install, we're going to our 7-pole, supplied with the install kit, and mount it here in the pickup bed on the driver's side, behind the wheel well, in front of the tailgate. This will give us easy access. To mount it in the pickup bed side, we're going to go ahead and drill through the bed liner, through the sheet metal, and then mount it using the self-tapping screws provided with the install kit. Now, we need to make a hole large enough for the back of the 7-pole socket, so we're going to drill out a 2-1/8 inch hole as per the instructions. Now with the hole drilled out, we need to take the 7-pole connector that matches the back of our 7-pole socket, and feed it from underneath, up and out through our cut out hole. Then, we'll go ahead and take the 7-pole connector, attach the wiring harness, and mount it to the pickup bed side. Now, I'm going to go ahead and feed the 7-pole over the frame and then up through our hole. more
2/24/2015 12:14:09 PM
Trailer Connector Socket Installation - 2005 Chevrolet Silverado- Video
Today, on this 2005 Chevrolet Silverado Extended Cab, we're going to install Part Number HM40975. This is the Pollak 7- and 4-Pole Trailer Connector with Mounting Bracket. Typically, this part can be used as a replacement on your vehicle. However, in this case, even the original is completely missing, but we do need this original OEM socket to make it work. If you have this on your vehicle, you should be good to go. Now it's a good idea to make sure that you have this completely cleaned out, as best as you can. Let's go ahead and just set this aside for now, and we'll go ahead and mount our bracket for our 7-pole connector. Mounting your bracket is a matter of personal preference. I like using this location right here for our two holes will line up this part of the steel in the bumper. more
1/16/2015 5:05:17 PM
Trailer Wiring Harness Installation - 2002 Chevrolet Silverado 118315- Video
Today on our 2002 Chevrolet Silverado 3500HD, we're going to be installing the tow-ready T-One vehicle wiring harness with a 4-pole flat trailer connector, part number 118315. Here's what our T-One vehicle wiring harness looks like. We have two connectors and a ground wire. The white wire here with the ring terminal. Right here's the connector that we're going to need to take apart and add our connection points in on. To remove the factory wiring harness here, there's a little tab here on the underside. Just simply need to lift that up gently being careful not to break it. We'll then pull the connector apart so it looks something like that. more
1/5/2015 2:33:50 PM
Fifth Wheel Wiring Harness Installation - 2010 Chevrolet Silverado- Video
Today in this 2010 Chevrolet Silverado Extended Cab 2500 HD, we're going to install part number 54701-003. This is a 5th Wheel and Gooseneck 90 degree wiring harness with 7-pole plug connector. This our 7-pole connector, and this is the part that's going to get installed above truck. Now typical 5th Wheel application will be mounted towards the back via a sliding camper, chances are this may be installed forward of the truck. For this case, we're going to install our about this location right here. Once we have our location determined, we'll go ahead and drill a quarter inch hole. We'll follow that up with a 2-inch hole saw. We'll go ahead and clamp the mess we have right now and we'll also touch up the inside edge with something to protect the metal. Now we'll go ahead and take the end of our wire harness and I'll plug into a 7-pole connector in the bumper, let's go ahead and push it through and down. Make sure it's sitting the way you want it. We'll go ahead and use the included fasteners and attach it to the bed. We'll go ahead and take the self-tapping hardware and with a 5/16 nut driver, we'll go ahead and run it into the sheet metal of the bed. We're already done inside the bed, let's go underneath the truck and make our connection down there. All right to make things easier, we got our spare tire out of the way. Here's our 7-pole connector that goes into the bumper. There's a lock on this side here that will push down the tab and pulled apart. Sometimes there's a a little gray connector that fits inside here. This truck didn't have it, but if it did, you take a small screwdriver and you just back it out, out of the way, and it'd be just fine. OK. Let's leave that alone from now. more
11/25/2014 10:15:16 AM
Trailer Wiring Harness Installation - 2005 Chevrolet Silverado- Video
Today on our 2005 Chevrolet Silverado crew cab, we're going to install part number 30955. This is a replacement multi-tow 7-way and 4-way trailer connector. We're going to replace the original 7-pole connector That came with the vehicle. This is how it came to us, so you can see that the connector has seen better days. To remove our 7-pole connector, there's a tab right here that we push down and pull out. Sometimes there may be a little gray tab or a lock that fits around this. more
11/20/2014 11:44:43 AM
Fifth Wheel Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Today on this 2013 Chevrolet Silverado CrewCab, we're going to install part number 54701-003. This is a 5th-wheel and gooseneck 90-degree wiring harness with 7-pole plug. The first thing we need to do is find a location for it. This is largely personal preference. You can mount it pretty much anywhere in this area right here up towards the front of the truck as well. The 90-degree angle here makes it a little bit shorter than most normal hard wired connections, so it gives it more flexibility as you put it in a narrow spot if you'd like. In this case, we'll put it next to the tailgate area. Here's your tailgate. more
11/3/2014 3:39:53 PM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevy Silverado we'll be installing the Draw-Tite 5th Wheel Gooseneck Wiring Harness with seven blade connector, part number 20110. To begin our install we'll first go ahead and locate where we'll be mounting our new seven blade connector. Because on this application we have a storage box on the driver's side, we're going to put our seven blade connector here on the passenger's side. For this application we're going to mount it here above the cargo hook at the recess of the pickup bed. To mount it we'll need to drill out a two inch hole. We'll make our pilot hole first and then we'll take our pole saw bit and drill out the larger two inch hole. more
9/12/2014 4:46:04 AM
Trailer Wiring Harness Installation - 2013 Chevrolet Silverado HM48420- Video
Today in our 2013 Chevy Silverado, well be installing the Hopkins Endurance 6-Pole Trailer Connector Socket part number HM48420. This will be in conjunction with the Pollak 5th Wheel and Goose Neck Trailer Connector Wiring Harness part number PK11932. To begin our install, well take our Hopkins 6-Pole and make sure we have a hole saw large enough so that the 6-Pole can be mounted in our bedside. Were going to mount it about right here, so well go ahead and take our hole saw and drill a hole in the bed liner and side. Now we can take our wiring harness and feed it from underneath up and out the free drilled hole. Once we feed it through, well go ahead and pull it out so we can work with the end. Typically we would install a seven blade end that would connect to this wiring harness, but because we need a 6-pole trailer connector to connect to our trailer end, were going to go ahead and remove each one of these connectors. more
8/5/2014 11:04:11 AM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2009 Chevrolet Silverado- Video
Today on our 2009 Chevrolet Silverado, we'll be installing the Hopkins Endurance 5th Wheel and Gooseneck 90-Degree Wiring Harness with a 7-Pole Plug, part number 41157. Now we're going to figure out exactly where we want to drill our hole for this one. We'll going to line it up somewhere in there. Go ahead and put a pilot bit. Then go ahead and step up to our hole saw. We're using a 2-1/8. Go ahead and vacuum up all of our shavings real quick. Now we're going to take this end of our wiring harness, feed it up from the underside, and come out our hole we just drilled. more
7/16/2014 8:38:22 AM
Trailer Wiring Harness Installation - 2008 Chevrolet Silverado- Video
Today in our 2008 Chevrolet Silverado, we'll be installing the Hopkins replacement multi-tow seven-way and four-way trailer connector, part number 30955. We'll start our install by removing the factory cover. You just twist out of place, pull that tab, and it slides out. With the factory cover removed, we'll take our wiring harness and just push it back through for now. We'll then take our new four and seven-pole connector and its wiring harness and push it through that hole as well. We're just going to kind of line it up in place there. Once it's in place, we'll make sure we have plenty of clearance and material to drill through and hold it in place. more
7/14/2014 1:01:04 PM
Hopkins Trailer Connector Socket Installation - 2003 Chevrolet Silverado- Video
Today on our 2003 Chevrolet Silverado 1500, we're going to be installing the Hopkins 7- and 4-pole trailer connector for the vehicle end, part number HM40975. Here's what our 4- and 7-way plug looks like as well as the bracket that comes with the kit. To install the plug and the bracket you would just simply slide it in. It would snap into position. We're going to need to choose a location here on the underside of the bumper to mount our bracket. This hitch is one of the heavy-duty hitches. more
7/2/2014 9:13:16 AM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2005 Chevrolet Silverado- Video
Today, on this 2005 Chevrolet Silverado Crew Cab, this is a Hopkins Endurance 5th Wheel Gooseneck 90-Degree Wiring Harness. Were going to install part number 41157. This is actually relatively easy to install. First off, lets find a location where were going to install our 7-pole connector. In this case, it will be closer to the tailgate. Once we find our location, well go ahead and drill out a 1/4 pilot hole. After we drill out our pilot hole, well go ahead and enlarge it with a hole saw to a diameter of 2-1/8. Once we have our hole drilled out, well go ahead and install our wire harness. more
2/10/2014 5:02:19 PM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2013 Chevrolet Silverado- Video
Today on our 2013 Chevy Silverado we'll be installing the Hopkins Endurance fifth wheel and gooseneck 90 degree wiring harness, part number 41157. To begin our install we'll first locate where we're going to mount the new 7-pole connector in the pickup bed. For this application, we'll be doing it behind the driver's side wheel well. Using our hole saw bit, we'll go ahead and cut out the hole for our 7-pole plug. With our hole cut out, we'll then go ahead and take the 7-pole end and route it up underneath the vehicle out the hole we just created into the pickup bed. Once we have our wire routed, we'll go ahead and take some of the dielectric grease provided with the install kit and put it on the end of the wiring connector. Then we can go ahead and take the wiring connector and secure it to the back of the 7-pole connector. We'll go ahead and check to make sure it locked in place. more
2/6/2014 11:43:13 AM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2011 Chevrolet Silverado- Video
All right, today on this 2011 Chevrolet Silverado, we're going to install part number 41157 from Hopkins. This is the Endurance 5th Wheel gooseneck, 90 degree wire harness. All right, first thing we do is go ahead and find a location in the truck bed to install this. In this case, we're going to be right behind the taillight, below the stake pocket about 3/4 of the way down to the bed. Once we know where we're going to put our connector, we'll go ahead and drill out a pilot hole. We're going to drill out a 1/4 inch hole first, then go back at it with our hole saw. The hole saw we are using will be 2 and 1/8 inches. more
10/4/2013 8:21:33 AM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2006 Chevrolet Silverado- Video
Today on our 2006 Chevy Silverado well be installing the Hopkins Endurance fifth wheel and gooseneck 7-pole wiring harness, part number 41157. First were going to locate where were going to install the 7-pole plug in our pickup bed. Here towards the end of the bed would be a perfect location. First well go ahead and drill a pilot hole. Then well go ahead and enlarge it as per the instructions with a hole saw bit. Now well move underneath the vehicle where well locate the manufacturers 7-pole plug and remove the manufacturers wiring. more
8/20/2013 4:13:29 AM
Trailer Wiring Harness Installation - 2006 Chevrolet Silverado- Video
Today on our 2006 Chevrolet Silverado, we will be installing the Bargman 5th Wheel/Gooseneck 90 degree Wiring Harness with 7-Pole plug, part number 50-97-410. To begin our install we will first locate where were going to mount the 7-Pole plug. Here on the driver side bed behind the wheel well is a great location. Now well go ahead and drill out a hole large enough to fit the 7-Pole connector. The size will be indicated in the instructions. Now with our hole cut, well go ahead and feed the wiring harness down into the cutout hole being careful not to cut the wire on the sharp edges along our cutout. Now with the wire fed underneath, well go ahead and center up the 7-Pole plug against the sheet metal of the side of the pickup bed and use the self-tapping screws to secure it. more
8/19/2013 3:34:01 PM
Hopkins Endurance Fifth Wheel Wiring Harness Installation - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado we'll be installing the Hopkins Endurance Fifth Wheel Goose Neck 90 degree wiring harness with seven-pole plug, part number 41157. To begin our install we'll first go ahead and find the mounting location for our new seven-pole connector in the pickup bed. Now we've located it we'll go ahead and draw out a pilot hole.Then using our hole saw we'll go ahead and open it up to the final size as per the instructions. Now with our hole in the bed created well go ahead and get underneath the vehicle, take the wiring harness and feed it up through the hole we just cut out. Next we'll get back into the pickup bed, take our seven-pole plug and connect it to the wiring harness.Quick tech tip: before you make this connection I recommend you use the dielectric grease provided with the install kit to put it over the terminal connections. This will help to assist in keeping out moisture and corrosion. more
8/12/2013 3:53:28 PM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2012 Chevrolet Silverado- Video
All right, today on this 2012 Chevrolet Silverado, we're going to install part number 20110. First thing we do is find a location for our wire harness 7-pole plug. We're going to inside the bed towards the back of the tailgate. We're going to drill out a pilot hole first, and then drill a 2" hole with a hole saw. We'll run our wire harness through the hole and out the bottom. Now we'll go ahead and take the plug and attach it to the wire harness. more
8/9/2013 12:28:07 PM
Pollak Twist-In Trailer Connector Installation - 2013 Chevrolet Silverado- Video
Today well be installing the twist-in 7-pole RV-style trailer connector for Chevy and GMC vehicles, part number PK11916 on our 2013 Chevrolet Silverado. Alright, to begin our installation, were going to start at the rear of the vehicle installing the 7-pole socket. First, we want to remove the 7-pole factory socket. To do this, we want to make sure that we have the tab pushed in. This allows us to twist the socket and pull it away from the bumper for easy removal. We need to remove the lock at the back that holds the cap on. more
6/18/2013 4:44:59 PM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2008 Chevrolet Silverado- Video
Today on our 2008 Chevrolet Silverado we're going to install part number 20110 from Draw Tite. This is the fifth wheel and goose neck wiring harness. First thing we're going to do is go ahead and find a location for our seven pole connector. We're going to locate it on the inside edge of the bed behind the driver's side taillight. Once we have that established we'll go ahead and drill a 3/4 inch pile hole first.Then we'll follow up with a holes saw using a diameter of 2-1/8 inches. We'll go ahead and drill through the bed liner and the bed. more
5/20/2013 4:48:16 AM
Pollak Twist-In Trailer Connector Installation - 2011 Chevrolet Silverado- Video
All right. Today, on this 2011 Chevrolet Silverado, we're going to install Part Number PK11916. Now, our truck has a cap for the wiring harness, but doesn't have a plug in it all ready. So first step, we're going to go ahead and remove the cap. Looking at the cap in the bumper, we'll push down on a small tab on the left hand side. We'll use a screw driver to help push it out then we'll twist the cap. more
4/22/2013 5:38:51 AM
Today on this 2013 Chevrolet Silverado we're going to install part number PK11893-11932. Our first step is to go ahead and install the wires to the socket that will eventually go into the back of the seven pole connector. We'll go ahead and install the wires as follows according to the instructions. Our wires just push into place and the individual sockets are labeled, so number one will get the red wire, number two will get the white wire, number three will get the blue wire, and four will get the green wire. We're going to skip to number seven, the yellow wire, and put that in the number seven socket, that way we'll have room. Five will have the black wire and socket six will have the brown wire. more
3/3/2013 7:50:51 PM
Pollak Twist-In Trailer Connector Installation - 2012 Chevrolet Silverado- Video
Today, on our 2012 Chevy Silverado well install the Pollak Twist-In 7 pole connector, part number pk11916. First, before we can install the connector well need to remove the manufactures wiring from the back of the blank connector. To remove the wiring well first need to pull back on the locking tab lock. Then, press on the locking tab and remove the wiring connector from the blank connector. Now, with the wiring removed go to t he outside of the bumper, press on the blank connector lock and then twist it and pull it out of its position. Next, well take the new Pollak 7 pole connector and install it into the bumper in reverse order of removing our blank connector. more
12/17/2012 10:16:49 AM
Trailer Connector Socket Installation - 2004 Chevrolet Silverado- Video
Today on our 2004 Chevrolet Silverado, were going to install part number HM40975 from Hopkins. Well start off our install by installing the bracket onto the bumper of the truck. We can provide a hardware to attach it. Then well go ahead and take the factory wire harness on the vehicle and plug it into the back side of the connector. Once everything is plugged together, well take the connector and snap it into the bracket, and then were finished. And there you have for our part number HM40975 from Hopkins.. more
6/14/2012 1:16:56 PM
Trailer Wiring Harness Installation - 2012 Chevrolet Silverado- Video
Alright, today on a 2012 Chevrolet Silverado 3500, were going to install part number 50-97-410. First thing to do is find a location in the bed to drill out for a triple connector. Were going to drill out in this location right here (drilling). Alright now, well take a wire, run it through the hole and out through the bottom of the truck (drilling). Next well disconnect the natural connector 4-7 pole that's inside the bumper. There's a little locking tab, that removes, the gray one that's kind of hidden so you're going to take some time taking it apart. more
5/17/2012 4:36:14 PM
Fifth Wheel and Gooseneck Wiring Harness Installation - 2011 Chevrolet Silverado- Video
Today on this 2011 Chevy Silverado were going to install the tow ready 5th wheel Gooseneck 7 way tow harness extension part number 20110. Before we can begin making any installations, we need to locate where we are going to mount our 7 pole connection in the bed. This will fit to the sheet metal of the bed and then make a connection with our wire. Were going to mount our 7 pole connector on this area here, so first what were going to use is a small drill bit, go ahead and make my hole and then check the area to make sure that I'm not going to run into any obstruction. Im just going to leave my drill bit sitting there so I can then look from underneath and verify that there are no obstructions and then well drill it out to our two inch hole. All right thats for double checking I know were good, so now we go ahead and drill out to our two inch hole. more
12/19/2011 10:16:10 AM
Trailer Connector Socket Installation - 2006 Chevrolet Silverado- Video
Today on this 2006 Silverado 1500 were going to install 40975 from Hoppy, and our bracket will simply bolt on to the bottom of the bumper at this location right here. So what we need to do is pull out the wiring harness from the vehicle that is stored above the spare tire, and its got plenty of lead, you just got to pull it out. We are going to leave this alone for now, and we are going to go ahead and mount our bracket to the bumper. It comes with two self tapping screws. Okay right now we will take our wiring harness, remove the cap and we will take our plug and just snap it into the bracket, and then make our connection behind it. And with that were already done. more
10/19/2011 12:11:37 PM
Pollak Twist-In Trailer Connector Installation - 2008 Chevrolet Silverado Pickup- Video
Today on this 2008 Chevrolet Silverado Pickup we are going to be installing the Pollak Twist-in 7-pole connector part number PK11916. We are at the rear bumper of the Chevrolet Pickup and we are going to locate our mounting location for our 7-pole plug. If you look just to the left of your license plate holder. You have got an existing knock out plug that is basically just a holder for the position that we are going to be putting our 7-pole into. To release this there is a little tab on the outboard side. Just take a flat bladed screw driver or something you can get in there to press that tab in a little bit. Twist the knock-out counter clockwise 45 degrees and pull the knock out away from the vehicle. In doing so you can see on the back side we have got a plug in. 00:46 more
5/11/2010 11:51:48 AM
Pollak Twist-In Trailer Connector Installation - 2009 Chevrolet Silverado- Video
Today on this 2009 Chevrolet Silverado we are going to be installing the replacement Twist-In 7-Way Connector, part number PK11916. If we look back here at the rear of the vehicle, on the upper side of the step bumper, you can see we have got a factory knock-out plug here. This is where our Twist-In Connector is going to plug into. We are actually going to remove this cover here we are actually going to put our new 7-way plug in its place. To remove the knock-out cover, we need to just depress this tab here on the bumper, and that is going to allow us to twist counter-clockwise. I am just going to depress the tab here and disconnect the two. more
8/2/2009 6:04:44 PM
Trailer Wiring Harness Installation - 2008 Chevrolet Silverado 1500- Video
Today we are going to install part number PK11916 from Tow Ready, and we are going to install this wiring part on our 2008 Chevrolet Silverado pickup. Basically, what this part does is it puts a 7-pole end on the back of your pickup, replacing the factory blank right here. Basically, what you are going to do is take this plate here and twist it sideways until a key comes out. And you pull out the blank and the wire harness right here. Undo the wire harness by just pushing down this pin right here, and it comes right apart. more
2/24/2009 9:27:41 AM
Filter Videos
Filter Videos
